Water pumps

• Motors are winding oil-cooled and oil-lubricated • Includes a cable • Axial load is received by bearings • Pumped liquid temperature up to 30°C • Minimum motor cooling flow rate 8cm/sec..

• Motors are winding oil-cooled and oil-lubricated • Includes a cable • Axial load is received by bearings • Pumped liquid temperature up to 30°C • Minimum motor cooling flow rate 8cm/sec..

• Motors are winding oil-cooled and oil-lubricated • Includes a cable • Axial load is received by bearings • Pumped liquid temperature up to 30°C • Minimum motor cooling flow rate 8cm/sec..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

• Motors are non-winding (alternating resin stator) water-cooled and oil-lubricated • Includes a cable • Axial load is received by a thrust bearing • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per time is 20 times..

..

..

..

..

..

..

..

..

Motors are winding oil cooled and oil lubricated • Includes a cable • Axial load is received by bearings • Pumped liquid temperature up to 35oC • Minimum motor cooling flow rate 8cm/sec • Average starts per hour is 20 times • Maximum immersion depth 200m..